高速分条整经机
2013-08-15 16:20:08   来源：   评论：0 点击：

Tech Mech Engineers, Ahmedabad offers Electromech 100/105 High Speed Sectional Warping Machine, the salient features of which are as follows:

• Wide range of warps widths and beam flange dia.
• Working widths 2200-2400-2800 mm.
• Drum cone angle 11 degree standard (Optional 7 or 9 degree angle at extra cost).
• Beam flange dia 1000 mm standard.
• Section width 300 mm standard. (More than 300 mm is at extra cost).
• Maximum beam barrel length for fitting on beaming section will be = (Working witdh of machine + 400 mm). More than this will be extra cost.
• Additional beam adaptor supplied at extra cost (Only one set is supplied with machine).
• Fixed cone, Metallic drum, dynamically balanced drum circumference standard 2.5 metre.
• AC variable speed; Two separate motors for warping and beaming.
• Hydraulic band brakes on both sides.
• Auto braking in case of power failure.
• Wide range of table traverses out of 500 steps gear ratios for different type of yarns.
• "Flat" reed with lateral and fine angular adjustments.
• Central position of warping table and creel maintained. (Manual Operations).
• Beam doffing & donning hydraulically by hand lever operated valve.
• Automatic stopping after pre-determined section length.
• Electric safety device to avoid an accident.
• Ergonomically designed structure.
• Power supply 440 V�5%, 50 Hz, 3 phase.

Optional Attachments to Electromech-100/105:

• Liquid waxing device 3 roller system.
• Electronic static eliminator on traverse table, lease reed stand and cone creel.
• Eyelet/Ceramic board with stand.
• Liquid wax or oil circulation system with tank.